Description

Working Voltage:                                      2.7V

Surge (Maximum) Voltage:                     3V

Capacitance:                                              1F

Operating Temperature Range:          -40^oF to 149^oF

Maximum ESR (1KHz):                             0.15 Ohms (150 mOhm)

Maximum ESR (100KHz):                         0.20 Ohms (200 mOhm)

Termination Style:                                    Radial

Case Length:                                              13.5mm (0.53 inches)

Case Diameter:                                         8.5mm (0.33 inches)

Positive Terminal Lead Length:           25mm (0.98 inches )

Negative Terminal Lead Length:         20mm (0.79 inches)

Lead Diameter:                                        0.5mm (0.02 inches)

Lead Spacing:                                           3.5mm (0.14 inches)

Weight:                                                      1.2g (0.042 ounces)

NB: ESR stands for Equivalent Series Resistance.

SAFETY:

1) Do not reverse polarity. The smaller lead is the negative terminal. There is a minus (–) sign on the side of negative terminal. Always make sure your power supply is connected properly to the capacitor. Failure to do so may result in the damage of the capacitor.

2) Do not exceed the rated voltage of the capacitor.

3) Always look at the current rating of your power supply and make sure you don’t exceed it, because a capacitor (without an external resistor connected to it in series) behaves like a short circuit at initial charge.

FEATURES AND BENEFITS

• Ultra Low ESR for high power density.
• High pulse power capability.
• Low leakage current.
• Large Capacitance for High Energy Density.
• UL Recognized.
• Constructed with high performance materials.
• Cell voltage determined by the circuit application, not limited by the cell chemistry.
• High power available.
• High power density.
• Simple charging methods. No special charging or voltage detection circuits required.
• Very fast charge and discharge. Can be charged and discharged in seconds. Much faster than batteries.
• No chemical actions.
• Cannot be overcharged.

TYPICAL APPLICATIONS

•    High shock and vibration environments.
•    Electric, Gas, Water Smart meters
•    Controllers
•    RF Radio Power
•    Storage Servers
•    Pulse Power
•    Camera flash systems
•    Energy Harvesting
•    GSM/GPRS Pulse applications.
•    Wireless alarms
•    Remote metering.
•    Scanners.
•    Toys and Games.
•    Backup Power
•    Automotive subsystems.
•    Wind turbine pitch control.
•    Hybrid vehicles.
•    Rail.
•    Heavy industrial equipment.
•    UPS & telecom systems.
•    Back-Up Power.
•    Regenerative Power.
•    Burst Power.
•    Quick Charge.
•    Cold Starting.
•    DIY.
•    General.
•    Industrial.