Description

Note: Looking at the black head of the Hall Effect Senor, the side that has a writing of 05L is the top face and the other side is the bottom face. Place the Hall Effect Sensor so that the bottom face is against the table and top face is the face that you can see. Looking down at the top face with the pins facing towards you. The first pin is the Positive (+), the second pin is the Ground (-) and the third pin is the Output.

The output current flows when the South pole is facing the top face and turns off when the South pole is removed.

Notes:

1) Do not exceed the maximum limits of the sensor. Use a resistor or other components when needed.

2) For applications requiring a higher output current greater than the maximum output current rating, use an amplifier such as a transistor to carry that amount of current.

3) For DC Motor applications, remember to use a diode to drain the spike voltage that occurs when the current is automatically turned off.

                   Basic Specs

Supply Voltage minimum:        2.8V

Supply Voltage maximum:       32V

Supply Current:                          4 mA

Output Current max:                100 mA

Operating Temp:                      -40 to 302F

Junction Temp:                         -40 to 302F

Storage Temp:                          -58F to 302F

Operating point min:                7 mT

Operating point max:               18 mT

Release point min:                    5 mT

Release point max:                   16 mT

FEATURES/BENEFITS

• Built-in voltage overshoot protection.
• Built-in power reverse protection.
• Output protection against electrical disturbances.
• 8V to 24V DC operation voltage.
• For Unipolar and Alternating Magnetic Fields.
• Digital Output Signal
• Wide operating voltage range.
• Large Temperature Range.
• Temperature Compensated Magnetic Performance.
• Easy to use.
• Durable.
• Safe.
• Well designed
• Easy to install

TYPICAL APPLICATIONS

• Brush-less DC Motor Commutation.
• RPM Detection.
• Consumer and industrial position sensor.
• Position Indicator.
• Proximity Indicator.
• Rotation Indexing.
• Flow meters.
• Ideal for making electromagnets.
• LED blinkers and pulsations.
• Relays.
• Electronic communication.
• Inductors.
• Radiofrequency.
• Solenoids.
• Small Transformers.
• Motors
• Timer.
• Automotive
• Industrial
• Environmental Solutions.